Shindaiwa 269TCs, Руководство владельца/оператора

Страница: 22 / 26

22
Do not store your unit for a prolonged period
of time (30 days or longer) without performing
protective storage maintenance which includes
the following:
1. Drain the fuel tank completely and pull
the recoil starter handle several times to
remove fuel from the carburettor.
2. Always store fuel in approved container.
3. Place the ignition switch in the “
STOP ”
position.
4. Remove accumulation of grease, oil, dirt
and debris from exterior of unit.
5. Perform all periodic lubrication and
services that are required.
6. Tighten all the screws, bolts and nuts.
7. Remove the spark plug and pour 10 mL of
fresh, clean, two-stroke engine oil into the
cylinder through the spark plug hole.
a. Place a clean cloth over the spark plug
hole.
b. Pull the recoil starter handle 2 or 3 times
to distribute the oil inside the cylinder.
c. Observe the piston location through the
spark plug hole. Pull the recoil starter
handle slowly until the piston reaches
the top of its travel and leave it there.
8. Install the spark plug (do not connect
ignition cable).
9. Cover the chain and the guide bar with the
guide bar cover before putting them in
storage.
10. Store unit in a dry, dust free place, out of
the reach of children and other
unauthorized persons.
Note
■
For future reference, you should keep
this operator’s manual.
■
If this operator’s manual has become
illegible through impairment or is lost,
please purchase a new one from your
shindaiwa dealer.
■
When renting a machine together with
this operator’s manual provides
explanation and instruction, please
rend out the machine together with this
operator’s manual to a person who
operates the borrowed machine.
■
When transferring a product, please
deliver it attaching the operator’s
manual.
WARNING
Do not store in enclosure where fuel
fumes may accumulate or reach an
open
À ame or spark.
Long Term Storage (Over 30 Days)
Storage
■
Dispose of waste oil in accordance with
local regulations.
■
Major plastic parts making up the product
have codes showing their materials. The
codes refer to the following materials;
dispose of those plastic parts in accordance
with local regulations.
■
Please contact your shindaiwa dealer in
case you do not know how you should
dispose of waste oil
plastic parts.
Mark Material
! PA6- * F Nylon 6 - * lass ¿ ber
! PP- * F Polypropylene - * lass ¿ ber
! PE-DH Polyethylene
Disposal Procedure
* uide bar cover