Shindaiwa 269T Скачать руководство пользователя страница 6

 

 

 

 

 

 

 

 

• 

When fuel tank cap or oil tank cap is difficult to 

remove by fingers, put the enclosed socket wrench 

into the groove of cap and turn it counterclockwise. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

STARTING ENGINE 

• 

Move the chain saw at least 3 m from the fuelling 

point before starting the engine. 

• 

Do not allow other persons to be near the chain saw 

when you are starting or cutting with the chain saw.   

Keep bystanders and animals out of the work area. 

Do not let anyone hold wood for you to cut. 

• 

Do not start cutting until you have a clear work area, 

secure footing, and a planned retreat path from the 

falling tree. 

• 

Before you start the engine, make sure that the saw 

chain is not contacting anything. 

• 

Keep the handles dry, clean, and free of oil or fuel 

mixture. 

• 

Operate the chain saw only in well-ventilated areas. 

Exhaust gas, oil mist (from chain saw lubrication) or 

dust is harmful to health. 

 

 

 

 

 

 

 

 

 

• 

Fill the fuel tank outdoors over bare ground and 

install the fuel cap securely. Do not pour fuel 

indoors. 

• 

Wipe any spilled fuel off the unit. 

• 

Never refuel while the engine is still hot. 

• 

Do not store the unit with fuel in its tank, because a 

fuel leak could start a fire. 

• 

Bring an extinguisher or shovel in case of fire. 

• 

After refuelling tighten fuel cap firmly and check for 

leakage. In case of fuel leakage repair before 

starting operation since there is a danger of fire. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
 

• 

When starting the chain saw place the unit on a flat 

ground and hold the front handle with left hand and 

hold firmly the rear end of rear handle with right 

knee and pull starter handle with right hand. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TRANSPORTATION 

• 

When transporting your chain saw, use the 

appropriate guide bar cover. 

• 

Carry the chain saw with the engine stopped, the 

guide bar and saw chain to the rear, and the silencer 

away from your body. 

NOTE 

Do not press socket wrench forcefully, since tank cap 

is plastic.   

Pressing forcefully can damage tank cap. 

If tank cap is damaged, do not start engine and ask 

your shindaiwa dealer for replacement. 

WARNING      DANGER 

DO NOT DROP START THE CHAIN SAW, DROP 

START PUTS CHAIN SAW IN AN INSECURE 

POSITION AND CAN RESULT IN INJURY. START 

THE CHAIN SAW IN A CORRECT MANNER. 

Fuel tank cap 

Fuel tank cap

Oil tank cap 

Loosening 

direction 

Oil tank cap

Tightening 

direction

3 m 

Guide bar cover

Содержание 269T





























Отзывы: