Shindaiwa 269T, Инструкция по эксплуатации

Страница: 11 / 28

11
1.
OPERATOR’S MANUAL
- Included with unit.
Read before operation and keep for future
reference to learn proper, safe operating
techniques.
2.
FRONT HAND GUARD
- Guard between the front
handle and the saw chain for protecting the hand
from injuries and aiding in control of the chain
saw if the hand slips off the handle. This guard is
used to activate the chain brake which is to stop
the saw chain rotation.
3.
REAR HANDLE (FOR THE RIGHT HAND)
-
Support handle located towards the rear of the
engine housing.
4.
CHOKE CONTROL KNOB
- Device for enriching
the fuel/air mixture in the carburettor to aid cold
starting.
5.
SILENCER COVER
Cover the silencer not to make
operator touch to hot surface of silencer.
6.
CLUTCH COVER
- Protective cover to the guide
bar, saw chain, clutch and sprocket when the
chain saw in use.
7.
CHAIN TENSION ADJUSTER
- This is device to
adjust chain tension.
8.
CHAIN CATCHER
- A projection designed to
reduce the risk of the operator’s right hand from
being hit by a chain which has broken or derailed
from the guide bar during cutting.
9.
GUIDE BAR
- The part that supports and guide
the saw chain.
10.
CHAIN -
Chain, serving as a cutting tool.
11.
FRONT HANDLE (FOR THE LEFT HAND)
-
Support handle located at the front of the engine
housing.
12.
FUEL TANK CAP
- For closing the fuel tank. Turn
cap clockwise to tighten. Tighten it firmly with
hand.
13.
OIL TANK CAP
- For closing the oil tank. Turn cap
clockwise to tighten. Tighten it firmly with hand.
14.
STARTER HANDLE
- The grip of the starter, for
starting the engine.
15.
AIR CLEANER COVER
- Covers air filter.
16.
CLEANER COVER KNOB
- Device for installing
the air cleaner cover. Turn cleaner cover knob
clockwise to tighten. Tighten it firmly with hand.
17.
PRIMER PUMP
- When starting engine, push
primer pump 3 or 4 times.
18.
THROTTLE TRIGGER
- Device activated by the
operator’s finger, for controlling the engine speed.
19.
THROTTLE TRIGGER LOCKOUT
- A safety lever
which must be depressed before the throttle
trigger can be activated in order to prevents the
accidental operation of the throttle trigger.
20.
IGNITION SWITCH
- Device for connecting and
disconnecting the ignition system and thus
allowing the engine to be started or stopped.
21.
GUIDE BAR COVER
- Remove device for covering
the guide bar and saw chain during transport and
other times when the chain saw is not in use.
DESCRIPTION