21
5.6. Charging PLEXTALK.
In order to charge the internal battery, you need to connect
PLEXTALK to the mains supply. Do this as follows:
•
Place PLEXTALK face up in its normal operating position.
•
To charge the battery using mains power, plug the supplied AC
adapter into the power input terminal on the centre of the back
face. Then plug the power adaptor into the mains socket.
Charging will start.
5.7. Maintenance and battery care.
It is important that you look after your PLEXTALK properly to ensure
that you do not cause accidental damage to it, the battery or the
media. It is strongly recommended that you read this section
carefully.
5.7.1. Unit care.
When cleaning your PLEXTALK take note of the following points:
•
WARNING:
Always disconnect PLEXTALK from the mains
supply before cleaning.
•
Carefully wipe any dust and dirt from PLEXTALK with a soft
cloth that has been slightly dampened with a diluted, neutral
detergent, then wipe dry with a cloth.
5.7.2. Battery care.
In order that you get the most out of your rechargeable battery, you
should take careful note of the following points:
•
The battery will normally take 4 hours to fully charge. However,
when using your PLEXTALK for the first time, or after one
