Adjusting the cable tension
Adjusting the high limit
After taking up the initial slack in the inner cable, re-secure to the front derailleur.
Normal type
Pull
Top route type
Pull
1.
Cut off the excess length of inner cable, then install the inner end cap.
2.
Adjust the chain to the largest chainring and the smallest sprocket.
Smallest sprocket
Largest chainring
1.
Adjust the top position of the front derailleur.
Adjust the gap between the outer plate and chain to 0 - 0.5 mm.
Top swing type
Down swing type
Chain
Outer plate
2.
Adjustment
Left-hand lever adjustment
11
