B-tension screw adjustment
RD-M360 / RD-M310 / RD-TX800 / RD-TY500 / RD-TY200-SS / RD-TY200-GS
RD-TY21B / RD-TZ500
SIS adjustment
Set the chain on the largest sprocket and smallest chainring, and turn the crank arm backward.
1.
Turn the B-tension screw to adjust the guide pulley to be as close to the gear as possible but not so close
that it touches.
2.
Set the chain on the smallest sprocket and repeat the above to make sure that the chain tension is correct.
3.
In order to obtain suitable gear shifting performance, set the chain onto the largest sprocket and the
smallest chainring.
1.
Turn the B-tension screw to adjust so that the distance between the tip of the freewheel and the tip of the
guide pulley is 10 mm.
B-tension screw
Largest sprocket
Smallest sprocket
2.
Set the chain on the smallest sprocket and repeat the above to make sure that the chain tension is correct.
3.
Operate the shift lever once to move the chain from the smallest sprocket to the 2nd sprocket.
1.
Adjustment
SIS adjustment
16
