6
Assembly of the Inter-7 hub
2.
Install ball retainer H while
pressing in pawl C on the
driver and axle unit with a
screwdriver.
3.
Insert the end of the slide
spring of ring gear unit 1 into
the wide hole section B of the
driver and axle unit, press in
pawl C (2 places) with a
screwdriver, and then install
ring gear unit 1.
1.
Hold the two bevelled surfaces
of the hub axle on the sprocket
side in a vice.
Note:
Apply a liberal coating of internal
hub grease to the gear inside ring
gear unit 1.
Check:
After installing ring gear unit
1, turn ring gear unit 1 firmly
counterclockwise to check to
be sure that pawl C makes a
clicking sound.
Note:
Do not damage the threads of
the hub axle.
Note:
Be careful of the
setting direction.
Apply a liberal coating of
internal hub grease.
Be careful not to bend ball
etainer H while pressing it.
Be careful not to catch on the end
of return spring C.
(Y-041 20800)
GREASE
(Y-041 20800)
GREASE
Ring gear unit 1
Vice
Screwdriver
Ball retainer H
Wide hole section B
Pawl C
Pawl C
Pawl C
Pawl C
End of slide spring
