9
TL-7S20
Lock nut
Stop nut
This completes the assembly
of the Inter-7 hub.
14.
Install the dust cap
11.
Place ball retainer B onto
the hub shell.
Note:
Apply a liberal coating of internal
hub grease to the inside and
outside of the brake shoe unit.
Note:
Be careful of the setting
direction.
Apply a liberal coating of internal
hub grease.
12.
13.
Screw the stop nut to adjust so
that the hub shell can be
turned smoothly without any
play. After adjusting, secure
the stop nut with the lock nut.
Place the brake arm unit onto
the hub axle and turn it to
the left and right so that
the serrations of the brake
shoe and brake arm unit
engage with each other.
Then push the brake arm unit
fully into the brake shoe unit.
Ball retainer B
Hub shell
Brake arm unit
Brake shoe unit
Serrations
(Y-041 20800)
GREASE
(Y-041 20800)
GREASE
