8
7.
Engage the teeth of the planet
pinion in carrier unit 2 with
the teeth of ring gear unit 2
while turning carrier unit 2
slightly to the left and right,
and then press in ring gear
unit 2.
Note:
Apply a liberal coating of internal
hub grease to the inside and
outside of the brake shoe unit.
Note:
Apply a liberal coating of internal
hub grease to the grease groove
of the hub shell.
If seal spring R hooks into
the wrong part of the right hand
dust cap, push seal spring R with
a screwdriver.
Check:
After installing the hub shell, turn
the hub shell counterclockwise
and check to be sure that it turns
smoothly.
Note:
Apply a liberal coating of internal
hub grease to the teeth of
the planet pinion (3 places) in
carrier unit 2.
If undue force is applied,
the pawls inside will become
damaged, which will cause
operation problems.
Check:
Check to be sure that the stop
ring groove on the hub axle is
visible from the edge of carrier
unit 2 while carrier unit 2 is
pushed down.
8.
9.
Align the notched section of
the brake shoe unit with
the end of slide spring in
carrier unit 2, and then install
the brake shoe unit.
10.
Install the internal assembly
while turning the hub shell
slightly to the right and left so
that seal spring R of the hub
shell is sitting in the right
hand dust cap of the internal
assembly.
While pushing down carrier
unit 2, insert the stop spring
into the hub axle groove at
the surface of carrier unit 2.
Teeth of planet pinion
in carrier unit 2
Teeth of ring gear unit 2
Hub axle groove
should be visible
Notched section
of the brake shoe unit
End of slide spring
Stop ring
Carrier unit 2
Seal spring R
Grease
groove
Right hand
dust cap
Hub shell
Internal
assembly
(Y-041 20800)
GREASE
(Y-041 20800)
GREASE
(Y-041 20800)
GREASE
