To be continued on next page
18
INSTALLATION
Installation of the brake cable
9
(d)
(d)
After pressing the lever, check that the
red marks on the inner cable fixing
washer with the inner cable mounting
bolt unit press-fit into the winder unit
are in the right direction as shown in
the illustration.
(d)
Red
When detaching the cable, perform in
reverse order.
Front side
1
(B)
(C)
(A)
After checking that the cable
adjustment barrel
(B)
and adjustment
nut
(A)
are fully tightened, insert the
outer holder unit
(C)
into the inner
cable in the direction shown in the
illustration.
(A)
Adjustment nut
(B)
Cable adjustment barrel
(C)
Outer holder unit
2
(D)
(a)
After checking that the marking of the
back side of the inner cable fixing bolt
unit
(D)
is “F”, pass the inner cable
through the hole of the inner cable
fixing bolt unit.
(a)
Markings “F”
(D)
Inner cable fixing bolt unit
