20
INSTALLATION
Installation of the brake cable
6
(M)
(L)
Hook the inner cable
(M)
over the
cable hook
(L)
.
(L)
Cable hook
(M)
Inner cable
7
(O)
(N)
Insert the outer holder unit
(O)
into
the hole of the brake arm
(N)
from
underneath and slide it to the lower
section of the hole.
(N)
Brake arm
(O)
Outer holder unit
8
(P)
(Q)
After checking that the outer holder
unit
(Q)
is inserted as far as it will go
into the guide slot in the brake arm,
install the inner end cap
(P)
.
Then, set the inner end cap so that it
does not touch the fin or the spokes.
(P)
Inner end cap
(Q)
Outer holder unit
9
(R)
Turn the cable adjustment barrel
(R)
to
tighten the inner cable.
(R)
Cable adjustment barrel
10
(e)
(e)
After pressing the lever, check that the
red marks on the inner cable fixing
washer with the inner cable mounting
bolt unit press-fit into the winder unit
are in the right direction as shown in
the illustration.
(e)
Red
Installation of the brake cable can be
completed by the above procedure. When
detaching the cable, perform in reverse
order.
