Shimano ALFINE BL-S705-L, Руководство дилера

Страница: 6 / 95

6
TO ENSURE SAFETY
WARNING
• Be sure to follow the instructions provided in the manuals when installing the product.
Only use SHIMANO genuine parts. If a component or replacement part is incorrectly assembled or adjusted, it can lead to component failure and cause
the rider to lose control and crash.
• Wear approved eye protection while performing maintenance tasks such as replacing components.
Be sure to also inform users of the following:
• Never use alkali-based or acid-based solvents such as rust cleaners. If those solvents are used the chain might break and cause serious injury.
•
Clean the chain with an appropriate chain cleaner regularly. Intervals between maintenance depend on the use and riding circumstances.
• Check that the wheels are fastened securely before riding the bicycle. You may fall or collide and be seriously injured.
• Check the chain for any damage (deformation or cracking), skipping, or other abnormalities such as unintended gear shifting. The chain may break,
and you may fall.
„
Lithium ion battery
• Do not place the battery into fresh water or sea water, and do not allow the battery terminals to get wet. If this is not observed, fire, bursting or
overheating may occur.
• Do not use the battery if it has any noticeable scratches or other external damage. If this is not observed, bursting, overheating or problems with
operation may occur.
• Do not throw or subject the battery to strong shock. If this is not observed, bursting, overheating or problems with operation may occur.
• Do not use the battery if leakages, discoloration, deformation or any other abnormalities occur. If this is not observed, bursting, overheating or
problems with operation may occur.
• If any leaked fluid gets on your skin or clothes, wash it off immediately with clean water. The leaked fluid may damage your skin.
SM-BTR1: Lithium ion battery (external type)
• If charging is not complete after 1.5 hours, stop charging. If this is not observed, fire, bursting or overheating may occur.
• Do not use the battery outside its operating temperature ranges. If the battery is used or stored in temperatures which are outside these ranges, fire,
injury or problems with operation may occur. The operating temperature ranges are given below:
1. During discharge: –10°C - 50°C
2. During charging: 0°C - 45°C
SM-BTR2 / BT-DN110 / BT-DN110-A: Lithium ion battery (built-in type)
• If the battery does not become fully charged after 4 hours, stop charging. If this is not observed, fire, bursting or overheating may occur.
• Do not use the battery outside its operating temperature ranges. If the battery is used or stored in temperatures which are outside these ranges, fire,
injury or problems with operation may occur. The operating temperature ranges are given below:
1. During discharge: –10°C - 50°C
2. During charging: 0°C - 45°C