Conducting Examinations 2
Instruction Manual 3.9 Fluoroscopy, 3.10 Changing I.I. Field Size (Zooming-up Images), 3.11.4 Setting the Beam Hardening Filter
M516-E044
C
on
du
cti
ng
E
xa
m
in
at
io
ns
2
If a switching state is registered
using Smart C memory, the
settings can be configured with
one click after APR switching.
The initial values will be set if the
APR is switched during a study.
Memo
Changing Fluoroscopy Conditions
Increases the tube
voltage
Changing the tube voltage.
Selecting the I.I. field size
Change the Dose
Change the Pulse rate
Changing the filter.
Auto
Manual
Switches the
X-ray adjustment
mode.
The filter is changed each time
is
pressed.
Display
Material (Applications)
Filter 1
Cu0.1 mm (The limbs, etc.)
▼
Filter 2
Cu0.2 mm (Trunk, vertebral body, etc.)
▼
Filter 3
Cu0.3 mm (Chest, abdomen, etc.)
▼
NONE
No filter
Display
Continuous
Continuous
fluoroscopy.
▼ ▲
15 fps
Pulse
fluoroscopy
▼ ▲
10 fps
Pulse
fluoroscopy
▼ ▲
7.5 fps
Pulse
fluoroscopy
▼ ▲
3.75 fps
Pulse
fluoroscopy
Reduces the tube
voltage
* Only valid when the X-ray adjustment mode is
set to manual.
Displays the fluoroscopy mode selection screen.
Displays the APR selection screen.
Select the APR
Field size
with 9” I.I.
with 6” I.I.
Button (Color)
Normal
9"
6"
(Gray)
Zoomed
6"
4"
(Blue)
