Shield N Seal Shield Sealer SNS70, Руководство пользователя

Страница: 20 / 22

-19-
The Vacuum Sealer doesn’t pull a complete vacuum with bags
▪ To vacuum and seal properly, edge of bag must be across the seal bar. Make
sure bag is inside the chamber seal gasket and that there are no wrinkles in
the bag along the seal bar.
▪ If packaging from a roll bag, make sure first seal is complete and that there are
no gaps in either seal.
▪ The Vacuum Sealer and vacuum bag need to be clean, dry and free of debris
for the vacuum process to be successful. Wipe surface of seal bar and inside
of bag and try again.
▪ Check if the seal gasket is well installed or damaged.
Vacuum bag loses vacuum after being sealed
▪ Sharp items can puncture small holes in bags. To prevent this, cover sharp
edges with paper towel and vacuum in a new bag.
▪ Some fruits and vegetables can release gases (out-gassing) if not properly
blanched or frozen before packaging. Open bag. If you think food spoilage has
begun, discard food. If food spoilage has not yet begun, consume immediately.
If in doubt, discard food.
▪ Check if the heat seal pad is well installed or damaged.
The Vacuum Sealer is not vacuuming canisters properly
▪ The accessory hose may not be properly attached. Ensure the hose is
completely inserted into the lid of the canister and the accessory port and try
again.
▪ Make sure the canister lid is turned to the “Vacuum” setting (In Marinate Mode