SHG TEGERNSEE, Руководство по эксплуатации

Страница: 14 / 26

Operating manual: Submersible motor pumps Tegernsee & Tegernsee DIN 14425
– TP 4/1
SHG S
PECHTENHAUSER
H
OCHWASSER
-
UND
G
EWÄSSERSCHUTZ
G
MB
H
Gewerbestraße 3, D-86875 Waal, Germany www.spechtenhauser.de
Tel.: +49 8246.9695-20 shg@spechtenhauser.de
Fax: +49 8246.9695-24
0720BATSE008
13
4.2 Operating the pump
For safe working on and with the pump, the wearing of safety shoes and safety gloves is
recommended, in order to prevent injury from crushing or cutting.
Each time when using the pump, also ensure the following
points:
1.
Before using the pump, it must be checked for damage to
the plug, cable and motor protection housing.
2. Transport the pump to the place of use.
Caution:
Always transport the pump with the handles provided for
this purpose only.
Danger:
The PE pump base on the inlet side is used to protect the
impeller from contact. The pump itself may not be operated
without the appropriate contact protection.
3. Mount a dimensionally stable spiral pressure hose with B-
Storz coupling to the outlet side of the pump. A suitable
fire hose can now be connected to this spiral hose. Lay
this at a suitable drain or collection tank. The end of the pressure hose must be ade-
quately secured against impact. The fire hose should be laid without kinks where pos-
sible to achieve an optimum pumping power. It is strongly recommended that you use
the optional dimensionally stable spiral pressure hose for the first 3 m.
Danger:
Ensure that the pressure hose end is adequately secured and
fixed. Otherwise, there is the risk of the hose end being hit
when switching on the pump.
4. If the pump is to be lowered into a shaft, attach a suitable
length of rope to the notch at the carrying handle.
Caution:
To lower the pump only the designated abseiling notch is used.
Under no circumstances should the pump be lowered to the
mains cable or the connected hoses.
The Tegernsee TP 4/1 is fitted
with an intake strainer with a
grain size of 8 mm. The grain
size can be increased to 40 mm
as required by removing the in-
take strainer.
Tegernsee carrying
handles
Abseiling notch