ENGLISH
2 3
ENJOYING SURROUND SOUND
Depending on the input digital signal format, select the desired decoding mode.
1
• Each time the AUTO button is pressed, the decoding
mode changes as follows :
IN-AUTO : The input digital signal format(DTS, Dolby
Digital or PCM(2 channel stereo), etc.) used
by the selected digital input source is detected
automatically to perform the necessary
decoding process for optimum surround mode.
IN-DTS : The DTS signal processing is performed only
when DTS signals are input.
IN-PCM : The PCM signal processing is performed only
when PCM signals are input.
AUTO
1
2
3
4
5
6
7
8
9
0
T.TONE
DSP
STEREO
POWER
AUDIO
VCR
SPK SET
ADJUST
M1
M2
M3
AUDIO SEL.
OSD
SETUP
SLEEP
DISPLAY
DIMMER
RETURN
P.SCAN
TUNER
CD
AUX
VIDEO1 VIDEO2 VIDEO3
TAPE
7CH DIR.
+10
TUNE
PRESET
ENTER
SUBTITLE
ZOOM
VOLUME
MUTE
CH SEL.
CH/LEVEL
MACRO
DVD
CABLE
SAT
CD
AUX
TV
STANDBY
PL
PARA.
MENU
UNIVERSAL REMOTE CONTROL
RNC-40
or
AUTO
AUTO
Select the desired surround mode.
2
• Each time the DSP MODE
or
is pressed, the surround mode changes depending on the input signal format and the
selected decoding mode as follows :
When Dolby Digital signals are input in the IN-AUTO mode, one of the following modes can be selected depending
on the number of the recorded channels.
• Dolby Digital 5.1 or Dolby Digital EX 6.1 channel sources :
(DOLBY DIGITAL EX,) DOLBY DIGITAL and DOLBY VIRTUAL
• Dolby Digital 2-channel sources :
(DOLBY DIGITAL EX,) DOLBY PRO LOGIC II CINEMA, DOLBY PRO LOGIC II MUSIC, DOLBY PRO LOGIC and
DOLBY VIRTUAL
( ): possible only when surround back speaker setting is not “N”.
When PCM(2 channel stereo) signals are input in the IN-AUTO or IN-PCM mode, one of the following modes can be
selected.
• DOLBY PRO LOGIC II CINEMA, DOLBY PRO LOGIC II MUSIC, DOLBY PRO LOGIC, DOLBY VIRTUAL, DTS
NEO 6 CINEMA, DTS NEO 6 MUSIC, THEATER, HALL and MATRIX
• When the analog input is selected as signal input and analog stereo signals are input, you can select the desired of
these above surround modes, too.
• However, when DTS signals are input in the IN-AUTO or IN-DTS mode, the corresponding DTS mode will be selected
regardless of using the DDSP MODE
or
button.
Notes:
• When the selected decoding mode is not matched to the input signal format, the “DIGITAL” indicator flickers and
no sound is heard. Therefore, be sure to select the required decoding mode and the available surround mode
according to the input signal format.
• When the 7 CH DIRECT is selected as an input source, the decoding and surround modes cannot be selected.
• When the digital signals are not inputted, the desired surround mode cannot be selected.
Notes :
• Only when the digital input is selected as signal input for the input sources except TUNER, TAPE and AUX, the
decoding mode can be selected.
• Noise may be generated at the beginning of playback and while searching during DTS playback in the IN-AUTO
mode. In this case, try playing in the IN-DTS mode.
AUTO
1
2
3
4
5
6
7
8
9
0
T.TONE
DSP
STEREO
POWER
AUDIO
VCR
SPK SET
ADJUST
M1
M2
M3
AUDIO SEL.
OSD
SETUP
SLEEP
DISPLAY
DIMMER
RETURN
P.SCAN
TUNER
CD
AUX
VIDEO1 VIDEO2 VIDEO3
TAPE
7CH DIR.
+10
TUNE
PRESET
ENTER
SUBTITLE
ZOOM
VOLUME
MUTE
CH SEL.
CH/LEVEL
MACRO
DVD
CABLE
SAT
CD
AUX
TV
STANDBY
PL
PARA.
MENU
UNIVERSAL REMOTE CONTROL
RNC-40
or
DSP
DSP MODE
