Sherwood RD-8108, Руководство пользователя

Страница: 24 / 41

2 5
ENGLISH
Adjusting each channel level
Select the desired channel.
6
Adjust the level of the selected channel
as desired.
7
Repeat the above steps 6 and 7 to adjust each channel level.
8
• Each time this button is pressed, the corresponding
channel is selected and displayed for several seconds
as follows:
FL C FR SR SB
DTS L DD L SW SL
• You can adjust the LFE level for Dolby Digital or
DTS program source that includes LFE signal.
• When it is in the stereo or Dolby Virtual mode or the
speaker setting is “N”, center, surround L/R, surround
back or subwoofer channel will not be selected.
• When the SPEAKER button is set to off, only the
front L/R channel can be selected.
• The LFE level can be adjusted within the range of
-10~0 dB and other channel levels within the range
of -15~+15 dB.
• In general, we recommend the LFE level to be
adjusted to 0 dB.(However, the recommended LFE
level for some early DTS software is -10 dB.) If the
recommended levels seem too high, lower the setting
as necessary.
• If the channel display disappears, start from the step
6 again.
or
ADJUST
AUTO
1 2 3 4 5
6 7 8 9 0
T.TONE
DSP STEREO
POWER
AUDIO
VCR
SPK SET
ADJUST
M1 M2 M3
AUDIO SEL.
OSD
SETUP
SLEEP
DISPLAY
DIMMER
RETURN
P.SCAN
TUNER CD AUX
VIDEO1 VIDEO2 VIDEO3
TAPE
7CH DIR.
+10
TUNE PRESET
ENTER
SUBTITLE ZOOM
VOLUME
MUTE
CH SEL. CH/LEVEL
MACRO
DVD CABLE SAT
CD AUX TV
STANDBY
PL PARA.
MENU
UNIVERSAL REMOTE CONTROL
RNC-40
CH/LEVEL
AUTO
1 2 3 4 5
6 7 8 9 0
T.TONE
DSP
STEREO
POWER
AUDIO
VCR
SPK SET
ADJUST
M1 M2 M3
AUDIO SEL.
OSD
SETUP
SLEEP
DISPLAY
DIMMER
RETURN
P.SCAN
TUNER CD AUX
VIDEO1 VIDEO2 VIDEO3
TAPE
7CH DIR.
+10
TUNE PRESET
ENTER
SUBTITLE ZOOM
VOLUME
MUTE
CH SEL. CH/LEVEL
MACRO
DVD CABLE SAT
CD AUX TV
STANDBY
PL PARA.
MENU
UNIVERSAL REMOTE CONTROL
RNC-40
or
CHANNEL
SELECTOR
CH SEL.
Enter the test tone mode.
9
• The volume level of each channel can be adjusted easily with the test tone function.
Note : When the 7 CH DIRECT is selected as an input source or the SPEAKER button is set to off, the test tone
function does not work.
Adjusting each channel level with test tone
• The test tone will be heard from the speaker of each
channel for 2 seconds as follows:
FL C FR SR SB SL
SW
• When the speaker setting is “N”, the test tone of the
corresponding channel is not available.
Front Left Center Front Right Surround Surround
Right Back
Dolby Digital LFE Subwoofer Surround
or DTS LFE Left
AUTO
1 2 3 4 5
6 7 8 9 0
T.TONE
DSP STEREO
POWER
AUDIO
VCR
SPK SET
ADJUST
M1 M2 M3
AUDIO SEL.
OSD
SETUP
SLEEP
DISPLAY
DIMMER
RETURN
P.SCAN
TUNER CD AUX
VIDEO1 VIDEO2 VIDEO3
TAPE
7CH DIR.
+10
TUNE PRESET
ENTER
SUBTITLE ZOOM
VOLUME
MUTE
CH SEL. CH/LEVEL
MACRO
DVD CABLE SAT
CD AUX TV
STANDBY
PL PARA.
MENU
UNIVERSAL REMOTE CONTROL
RNC-40
T.TONE
MENU