ENGLISH
41
3.
Press the CURSOR LEFT(
◀
)/RIGHT(
▶
)
buttons to set the selected item as desired.
2.
Press the CURSOR UP(
▲
)/DOWN(
▼
) buttons
to select the desired item.
SETTING THE INPUT SETUP
INPUT SETUP
VIDEO 1 CONFIG
VIDEO 2 CONFIG
CD CONFIG
RETURN
D.IN : OPT / COX 1 / COX 2 / - - -
AUTO : ON / OFF
RETURN
D.IN : OPT / COX 1 / COX 2 / - - -
AUTO : ON / OFF
RETURN
D.IN : OPT / COX 1 / COX 2 / - - -
AUTO : ON / OFF
RETURN
• D.IN(DIGITAL IN) : To assign the connected DIGITAL INs to the desired input.
• AUTO(AUTO SURROUND) : To select the auto surround mode or the manual surround mode.
• RETURN : To return to the previous menu.
1.
Press the CURSOR UP(
▲
)/DOWN(
▼
) buttons to
select the desired input source, then press the
ENTER button.
Example: When selecting the VIDEO 1
V I
C F G
D EO 1
D I
.
O
3 0
P T
N
:
AT
• You should assign the connected DIGITAL INs to the desired input source.
(For details, refer to "CONNECTING DIGITAL INS" on page 7.)
• You can select the desired of OPT (optical), COX 1(coaxial 1), COX 2(coaxial 2) and - - - (analog).
■
Notes :
• In such a case that a DIGITAL IN is assigned to two input sources or more, when these input sources are selected, the digital
audio signals can be heard from the same DIGITAL IN.
• When the HDMI IN connector is connected to your video component, the DIGITAL IN setting is invalid.
When selecting the DIGITAL IN
• Depending on how to select a surround mode, you can select the auto surround mode or the manual surround mode.
OFF
(Manual surround mode)
: You can select the desired of different surround modes selectable for the signal being input with using
the SURROUND MODE SELECT( > / <) buttons. (For details, refer to "when selecting the manual
surround mode with pressing the AUTO/MANUAL button on the front panel" on page 17.)
ON
(Auto surround mode)
: The optimum surround mode will be automatically selected depending on the signal format being input.
■
Notes :
• When the SPEAKER button is set to off or “CENTER” and “SURR”(Surround) are set to “NO”, the auto surround mode is invalid.
• Even when the auto surround mode is selected and the same type of digital signal format is being input, the optimum surround
mode may vary depending on whether the speaker type is set to "NO" or not.
• When the auto surround mode is selected, the surround modes other than the optimum surround mode cannot be selected.
When selecting the AUTO SURROUND
↕
RD-606i(G)_ENG_110511_RD-606i(G)_ENG 2011-05-13 오전 9:57 페이지 41
