Sherwood Scuba SAGE, Руководство пользователя

Страница: 45 / 64

45
SAGE MANUAL
© Pelagic, 2017 Doc. No. 12-7864-r06 (8/21/17)
Alarm
If PO2 continues to increase and reaches the alarm set point, the audible alarm sounds again. The PO2 value (in place of DIVE TIME),
HIGH PO2 message, and up arrows (if not in decompression) will flash continually until PO2 decreases below the alarm set point.
146
21
1.40
FT
PO2
1056
PSI
2 O P H G I H 2 O P H G I H
GAS 1
NX 32
flashing
flashing
HIGH O2 SAT (OXYGEN SATURATION)
Warning >> at 80 to 99% (240 OTU)
Alarm >> at 100% (300 OTU)
Warning
When O2 reaches the Warning Level, the audible alarm sounds, O2 Safe Minutes display, O2 SAT (saturation) value, and up arrows (if
not in decompression)will flash until the audible is silenced.
130
10
1934
PSI
FT
DIVE TIME
0:44
O
2
O2 SAT 80%
GAS 1
NX 32
flashing
flashing
Alarm
When O2 reaches the Alarm Level, the audible alarm sounds, O2 Safe Minutes display 0, O2 SAT (saturation) value, and up arrows (if
not in decompression)will flash until the audible is silenced.
129
0
1934
PSI
0:56
FT
DIVE TIME
O
2
O2 SAT 100%
GAS 1
NX 32
flashing
flashing
Alarm At Surface
If O2 remains at 100% during the first 10 min on the surface, the graphic O2 SAT 100% (red) is to flash. When O2 becomes less than
100% after 10 min, the Surface Main is to be displayed.
649
NX 40
GAS 1
PSI
1:39
SURF
TIME
02 SAT 100%
flashing
flashing
If the diver surfaces due to 100% O2 while in Deco
If O2 remains at 100% during the first 5 min, the graphic O2 SAT 100% (red) is to flash. When O2 becomes less than 100% during 5
min, it is to be replaced with the Delayed Violation 1 Main screen. If O2 is still 100% after 5 min, operation is to revert to VGM (Violation
Gauge Mode) for 24 hours, displaying the VGM Surface Main.