CHD-6
User Manualt
CHD-6
User Manualt
5.2.5.1 USB-OTG connection
1
2
3
Picture 20 USB-OTG connection diagram
(1) As shown in picture 20, connect CHD-6 to the TV,
power, digital device (digital camera/U disk).
(2) CHD-6 will send out a signal to the TV telling you
that the system has entered the USB-OTG interface, as shown
in picture 21.
Picture 21 USB-OTG connection diagram
Press the OK button or PLAY/PAUSE button to start
copying, the interface will display the copying message,
and the indicator flashing rate will increase, this shows that
CHD-6 is copying all the files from the digital device to
CHD-6 hard disk. All the files will be copied to a folder call
dskxxxxx (0<=x<=9).
During data transfer, press the OK button or PLAY/
PAUSE button again will stop the transfer, a cancel message
will be displayed. When CHD-6 successfully cancels the
transfer, a “Copy cancelled, Need to copy, Please try again”
message will be displayed.
After copying is finished, a “Copy finish! Pull out USB
device” message will display. You should unplug the USB-
OTG adapter first, then unplug the USB device, the player
will automatically browse the copied files.
If error occurs during copying, the player will display
“Copy error! Pull out USB device”. You should unplug the
USB device and try again.
When using USB-OTG function, please note:
(1) The player and the USB device system format has to
be FAT32;
(2) During copying, please do not unplug USB-OTG
adapter, or copy error will occur.
(3) When connected with digital device, all the buttons
on the player will be locked.
5.2.6 FM Audio Transmitter
CHD-6 supports FM audio transmit, the range is 6 meter.
You can use the FM audio transmitter switch to switch from 9
modes, you can setup the mode to fit your desire function, the
following shows the details of the switch settings.
