CHD-6
User Manualt
0
CHD-6
User Manualt
2.Hard disk installation
⑧
⑨
⑩
Picture 7.1 CHD-6 Install hard disk
⑧
⑨
CON 2
Blue surface
a
b
c
Picture 7.2 CHD-6 install hard disk
(1) As shown in picture 7.2, connect the IDE cable
⑧
to
the hard disk IDE port, when connecting the IDE cable, make
sure the “CON2” red line is facing the same direction as the
hard disk label. Line up the IDE cable and the hard disk and
plug in the cable vertically, or the legs will bend;
(2) As shown in picture 7.1, connect
⑨
to the main board
⑩
FPC port, tighten the FPC port
⑩
and make sure the hard
disk label are facing up and lay on the middle of the main
board;
(3) When all the main board screw holes line up with
the hard disk screw holes, screws in all the hard disk support
screws
⑾
, do not let the IDE cable lay on the screw holes,
should look like picture 7.2c when finish.
3. Assembling the player
⑤
⑥
⑦
Picture 8 CHD-6 assemble diagram
(1) Connect the key pad cable
⑥
to the cable port on the
main board
⑦
;
(2) Hold
⑤
, push the main board and hard disk inside the
case;
(3) Screw in the screws
③
,
④
and put back in the plastic
covers
①
,
②
, this ends the installation of the hard disk.
