High Accuracy Gloss Meter Operation Manual
20
In the standard management menu, select "Clear" and then press the OK button. The
system will prompt to confirm. Press the measurement button or OK button to
execute the emptying operation or cancel it by pressing the return button.
8. Switching angle
For multi-angles instruments, it is able to modify the measurement angle.
In the main menu, select "Geometry" and press the OK button. Then select the angle
to use when measuring and press the OK button.
9. System settings
In the main menu, select the "Setting" menu item and press the OK button to enter
the System Settings menu.
9.1 Language Settings
After selecting "Language Settings" in the system settings menu, press the OK button
to enter the language menu. Select the required language and press the OK button
to set it as the system language.
9.2 Bluetooth(Only partial models)
For models supporting Bluetooth, there is "Bluetooth" item in the system menu.
Choose "Bluetooth" item and press confirm button, select "on", then press confirm
button or test button to save and open the function of Bluetooth. If close it, select
"off" and press confirm button or test button.
About Bluetooth connect to PC software please refer to the related software.
Note: When Bluetooth function is turned on, even if not in use, it also consumes
electricity. So turn off Bluetooth if do not use it.
9.3 Beep
In the system settings menu, select the "Beep" menu item and press the OK button,
then modify the switch options. After the modification is completed, press the OK
button or the measurement button to save the changes.
9.4 Auto Shutdown Options
In the Setup menu, select the "Auto Shutdown" menu item and press the OK button,
then modify the idle waiting time for automatic shutdown.
The automatic shutdown time can be set to 30 seconds, 60 seconds, 90 seconds, 2
minutes, or never shut down.
