High Accuracy Gloss Meter Operation Manual
19
Figure 34 View standards Menu
Press the OK button to open the browse standards menu, as shown in Figure 34. The
View standards menu includes:
1.
Set as the current standard: set the browse standard as the current standard;
2.
Modify the standard: modify the name and value of the viewing standard;
3.
Delete: delete the viewing standard.
7.3 Measurement Standards
In the standard management menu, select "Measure"and press the OK button to
perform the measurement.
Use average measurements in statistical mode, otherwise use basic measurements.
The average measurements procedure is similar to the standard measurement under
the statistical mode standard menu. The basic measurement is similar to the
standard measurement in the quality control mode.
7.4 Create Standards
Select "Create" in the standard management menu and press the OK button to
create a new standard, as shown in Figure 35. Then, in the "Create Standards"
interface, modify the name of the Standard and set the target value and upper and
lower limits for each angle.
Figure 35 Create Standards Interface
7.5 Clear Standards
Clear Standards will delete all stored standards.
