- 5 -
USING THE TV WIRELESS HEADPHONES
1. Press the Power button on the TV Wireless Headphones.
2. If the headphones are receiving a signal from the transmitter base, the Audio light on the headphones
will be BLUE. If there is no signal, the Audio light will be RED.
3. Place the headphones on your head. Adjust the volume using the Vol+ and Vol- buttons on the left
earcup. You should now be able to hear your TV on the headphones.
AUTO SHUTOFF
• To conserve power, your TV Wireless Headphones will power off automatically if they do not detect an
audio signal after 15 minutes. If this happens, simply press the Power button on the headphones to
reactivate the headphones and resume watching TV.
• To protect the battery, the TV Wireless Headphones will turn off automatically when the lithium battery
power level drops below 2.7V. If this happens, please return the headphones to the charging base in
order to recharge.
WIRED HEADPHONE USE
Your TV Wireless Headphones can also be used as wired headphones, for use outdoors or on a plane (with
a smartphone, tablet, laptop, MP3 player, etc.).
• For wired use, connect the included 3.5mm audio cable to the Audio In jack on the headphones. Plug
the other end into your mobile device.
• To conserve battery power, be sure headphones are powered off when using them as wired headphones.
• TV Wireless Headphones will not pick up wireless audio signals while the audio cable is plugged into the
Audio In jack. When you want to watch TV again, make sure you unplug the 3.5mm audio cable.
SYSTEM RESET
In the rare event of a malfunction, you may need to perform a system reset.
1. Turn on the power of the transmitter base.
2. Turn on the power of the headphones.
3. Press and hold the Scan buttons on the transmitter base and the headphones at the same time. The
signal indicator lights will begin to flash blue.
4. When you hear a long beep sound, let go of both buttons. The system has now been reset.
