CHARGING YOUR HEADPHONES
CONNECTING YOUR TV
1. Make sure the transmitter base is plugged in as described above.
2. Slide the Audio Signal switch on the back of the transmitter base to the OFF position.
3. Turn off the power on the TV Wireless Headphones, and place them on the transmitter base.
4. The power light on the transmitter base will turn RED while the headphones are charging. The power
light on the transmitter base will turn BLUE when the headphones are fully charged or in use.
5. Store your TV Wireless Headphones on the base when not in use.
NOTE: There are two LED lights on the front of the transmitter base: Audio Indicator Light (upper)
and Power Light (lower).
For optimum performance, the TV Wireless Headphones must be fully charged before the first use. This
can take 5 hours.
1. The TV Wireless Headphones can be connected to the TV three different ways:
Headphone Jack
— Use the included 3.5mm audio cable. Plug one end into the TV headphone jack. Plug
the other end into the Audio In jack on the back of the transmitter base.
Audio Out
— Check to see if your TV has red and white Audio Out jacks (also called RCA jacks). If so,
connect the included RCA to 3.5mm adapter cable to the Audio Out jacks on your TV. Then connect the
included 3.5mm cable to the adapter, and plug the other end of the 3.5mm cable into the Audio In jack on
the back of the transmitter base.
Digital Optical Cable
— Many new TVs do not have a headphone jack or Audio Out jacks. If this is the case,
you must use the optical output on your TV. This jack is also called “optical audio,” “TOSLINK” or “Digital
Audio Out (Optical).” Plug the included fiber optic cable into this jack on your TV. Then plug the other end
into the Optical input on the back of the transmitter base.
NOTE: Please be sure to check the shape of the
Digital Optical Cable before you plug it in. The shape of the cable must align with the shape of the jack.
2. When the transmitter base is connected to the TV, turn on the power on both the transmitter base and
your TV. Now turn on the TV. The Audio light on the transmitter base will turn BLUE.
NOTE: Make sure
your TV is not on mute.
- 4 -
