- 3 -
PARTS IDENTIFICATION:
TV WIRELESS HEADPHONES
SET-UP
A. Charging point
B. Power button
C. Signal indicator light
D.
1. Plug the included AC adapter into the DC 5V jack in the back of transmitter base. Then, plug the other
end into an AC outlet.
2. Slide the Audio Signal switch on the back of the transmitter base to the ON position.
3. If the blue power lower light illuminates, the unit is receiving power.
NOTE: This device must be used with the AC adapter supplied in the package. If your AC adapter is lost or
damaged, please contact Sharper Image Customer Service. Do not use any other AC adapters or power
cords.
E. Scan button
F. Volume –
G. Audio in jack
A
B
C
G
D
E
F
