Sharp XV-Z10E, Руководство по эксплуатации

Страница: 49 / 73

-47
Adjustments and Settings
OSD Display
(Setting On-
screen Display)
This function allows you to turn the on-screen
messages on or off.
Select “ ” (ON) or “ ” (OFF) in “OSD
Display” on the “Options” menu.
Setting the menu screen Page 38
Example: “Options” menu screen for
INPUT 2 (S-Video) mode
Lamp Timer (Life)
(Check-
ing the Lamp Life Status)
You can confirm the cumulative lamp usage time
and the remaining lamp life (percentage).
Display the “Options” menu to check the
lamp life status.
Checking the menu screen Page 38
Example: “Options” menu screen for
INPUT 2 (S-Video) mode
Using the “Options” Menu
Note
•
It is recommended that the lamp be changed
when the remaining lamp life becomes 5%.
For lamp replacement, contact your nearest
Sharp Authorised Projector Dealer or Service
Centre.
•
The table above indicates rough estimates in the
case of using only in each mode shown. Remain-
ing lamp life changes within the range of the val-
ues shown depending on the frequency at which
“Eco Mode” is switched to “
” (Eco mode) and
“ ” (Standard mode) (page 49 ).
Description of Lamp Life
Description of “OSD Display” Settings
Lamp usage condition
Operated exclusively
in Eco mode (
)
Operated exclusively
in Standard mode (
)
Remaining lamp life
100% 5%
Approx. Approx.
4,000 hours 200 hours
Approx. Approx.
2,000 hours 100 hours
Description
All On-screen Displays are displayed.
INPUT/VOLUME/MUTE/FREEZE/AUTO
SYNC/ “An invalid button has been
pressed.” are not displayed.
Selectable settings
ON
OFF
XV_Z10E_E_p42_47.p65 03.11.7, 4:18 PM 47