Sharp XV-Z10E, Руководство по эксплуатации

Страница: 24 / 73

-22
3 RCA to 15-pin D-sub cable
(3.0 m)
Supplied
accessory
DVD player or DTV* decoder
To INPUT 1
terminal
3 RCA to 15-pin
D-sub cable
(supplied)
To analog component
output terminal
To audio output
terminal
To AUDIO INPUT
terminal
ø3.5 mm minijack to
RCA audio cable
(commercially
available)
Connecting to Video
Equipment with a
Component Output
Terminal (INPUT 1)
Use a supplied 3 RCA to 15-pin D-sub cable
when connecting to the INPUT 1 terminal, com-
ponent video equipment such as DVD players
and DTV* decoders.
*
DTV is the umbrella term used to describe the
new digital television system in the United
States.
1
Connect the projector to the video
equipment using the 3 RCA to 15-
pin D-sub cable.
•
Secure the connectors by tightening the
thumbscrews.
2
Connect the projector to the video
equipment using a ø3.5 mm
minijack to RCA audio cable
(commercially available).
Note
•
When connecting the projector to the com-
ponent video equipment, set “Signal Type”
on the “Picture” menu to “Component”
(page 44), or press on the remote
control to select the component input.
•
Set “Special Mode” to “480P” for inputting the
525P signal (page
45 ).
•
A ø3.5 mm minijack to RCA audio cable (com-
mercially available) is required for audio input.
Connecting the Projector to Other Devices
XV_Z10E_E_p19_25.p65 03.11.7, 4:15 PM 22