IT
Connessioni
Presa AUX
L
R
A
B
a,
Usare un cavo audio da RCA a RCA (non incluso) per connettere le
uscite audio del televisore alle uscite
AUX (R L)
dell’unità.
b,
Usare un cavo audio da RCA a 3,5 mm (non incluso) per connettere le
uscite delle cuffi
e del lettore alle uscite
AUX (R L)
dell’unità.
Si collega a un‘antenna (FM/DAB)
Connettere un‘estremità dell‘antenna (inclusa) all‘uscita
ANT
sul retro
dell’unità. Quindi posizionare l‘antenna per ottenere una ricezione
ottimale.
IMPORTANTE:
•
potrebbe essere necessario regolare l‘antenna quando si sintonizza la
radio per ricevere un segnale migliore.
•
Non lasciare l‘antenna in un punto in cui potrebbe essere tirata dai
bambini.
Connessione all’alimentazione
EU
UK
•
Prima di connettere il cavo di alimentazione CA, assicurarsi di aver
completato tutte le altre connessioni.
•
C’è il rischio di danneggiare il prodotto! Assicurarsi che il voltaggio della
rete elettrica corrisponda al voltaggio stampato sul retro o sul fondo
dell’unità.
Connettere il cavo di alimentazione al connettore AC~ dell’unità e poi alla
presa di corrente.
Impostare l‘orologio
Sincronizzazione orologio
In modalità
STANDBY
, tenere premuto il pulsante
/MONO/STEREO
sul telecomando per sincronizzare l‘orologio. Premere i pulsanti
/
sul telecomando o sull‘unità per scorrere le modalità di sincronizzazione
orologio:
• RDS
si sincronizza solo con la stazione radio RDS.
• OFF
spegnere la funzione di sincronizzazione orologio, l‘orologio deve
essere regolato manualmente.
•
Quindi premere il pulsante
sull‘unità o
/SCAN
sul telecomando
per confermare.
Confi gurazione manuale dell‘orologio
--:--
00:00
1 1 1 1
La confi gurazione manuale dell‘orologio può essere eff ettuata solo in
modalità
STANDBY
.
1.
In modalità
STANDBY
, tenere premuto il pulsante
OROLOGIO
[ sul
telecomando o sull‘unità fi no a che le cifre delle ore lampeggiano.
– Premere il pulsante
sull‘unità o il pulsante
/SCAN
sul telecomando per selezionare il formato 12/24.
2.
Premere i pulsanti
/
sul telecomando o sull‘unità per regolare
le cifre delle ore quando lampeggiano, quindi premere il pulsante
OROLOGIO
sul telecomando per confermare, quindi le cifre dei minuti
lampeggiano.
3.
Premere i pulsanti
/
sul telecomando o sull‘unità per regolare
le cifre dei minuti quando lampeggiano, quindi premere il pulsante
OROLOGIO
sul telecomando per confermare. Ogni stato attivato sarà
annullato se nessun pulsante viene premuto entro 15 secondi.
Impostare il timer per l‘allarme
Il tempo dell‘orologio deve essere impostato all‘ora corrente affi
nché il
timer possa funzionare correttamente.
1.
In modalità
STANDBY
, tenere premuto il pulsante
TIMER/SLEEP
[ sul
telecomando fi no a che le cifre delle ore lampeggiano.
2.
Premere i pulsanti
/
sul telecomando o sull‘unità per regolare
le cifre delle ore, quindi premere il pulsante
TIMER/SLEEP
sul
telecomando per confermare, quindi le cifre dei minuti lampeggiano.
3.
Premere i pulsanti
/
sul telecomando o sull‘unità per regolare
le cifre dei minuti, quindi premere il pulsante
TIMER/SLEEP
sul
telecomando per confermare, la modalità lampeggia sullo schermo.
4.
Premere i pulsanti
/
sul telecomando o sull‘unità per
selezionare:
–
FM
(per svegliarti con la tua stazione radio FM selezionata)
–
DAB
(per svegliarti con la tua stazione radio DAB selezionata)
–
BUZZER
(per svegliarti con un suono acustico)
–
DISCO
(per svegliarti con la musica di un DISCO)
–
USB
(per svegliarti con la musica USB)
Premere il pulsante
TIMER/SLEEP
sul telecomando per confermare, il
display mostra il livello del volume.
5.
5 Premere i pulsanti
/
sul telecomando o sull‘unità per regolare
il volume, quindi premere il pulsante
TIMER/SLEEP
sul telecomando
per confermare, il display mostra l‘ora corrente e “
” appare sullo
schermo.
Suggerimenti:
•
Ogni stato attivato sarà annullato se nessun pulsante viene premuto
entro 15 secondi.
•
Il timer con sintonizzatore FM mostra l‘ultima stazione sintonizzata.
Attivare e disattivare l‘allarme.
•
Premere il pulsante
TIMER/SLEEP
sul telecomando per visualizzare le
impostazioni dell‘allarme o attivare l‘allarme.
•
Per disattivare l‘allarme, premere
TIMER/SLEEP
due volte. “
” scompare
dal display sulla parte anteriore dell‘unità.
•
Per attivare l‘allarme, premere
TIMER/SLEEP
due volte. “
” appare sul
display sulla parte anteriore dell‘unità.
Содержание XL-B715D
