E-4
Notes on Operation
About the Temperature Monitor Function:
• If the projector starts to overheat due to set-up problems or a dirty air filter, “TEMP.” will flash in
the upper-left corner of the picture. If the temperature continues to rise, then the lamp will turn
off, the TEMPERATURE WARNING indicator will flash, and after a 90-second cooling-off
period the power will shut off. Refer to page 32, “Maintenance Indicators,” when the “TEMP.”
warning appears in the picture.
About the Lamp Monitor Function:
• When the projector is turned on after the lamp has been in use for more than 1,400 hours, the
yellow “LAMP” display will flash on the screen for 60 seconds, as shown on the right. This is to
alert you that it is time to replace the lamp. At this point, take your projector to the nearest
Authorized Sharp Industrial LCD Products Dealer or Service Center to have the lamp re-
placed.
• If the lamp is used for more than 1,500 hours, the projector power will automatically turn off,
and the projector will be in STANDBY mode.
• Refer to page 32, “Maintenance Indicators,” when the “LAMP” display warning appears.
Caution: If “LAMP” begins to flash on the screen, be sure to take your projector to the nearest Authorized Sharp
Industrial LCD Products Dealer or Service Center to have the lamp replaced.
TEMP.
LAMP
Outstanding Features
Allows easy projection of large screen, full-color computer
and video images.
•
Can be projected directly onto a video screen or white
wall.
•
Lightweight, convergence-free system for easy
installation.
DIRECT COMPUTER COMPATIBILITY
A multi-scan RGB Input accepts signals from SXGA
(1,280 dots
×
1,024 lines compressed), XGA (1,024 dots
×
768 lines), SVGA (800 dots
×
600 lines), VGA and Mac
(1,024 dots
×
768 lines maximum) compatible computers
without the need for any additional hardware.
FLEXIBLE USE
In addition to the standard front projection mode, the
menu driven functions can be used to instantly reverse
the image for rear projection, and invert the image for
ceiling mounting.
POWER ZOOM AND FOCUS
•
Provides simple screen-size adjustments from either the
projector or the remote control.
•
Screen projection size adjusts from 40 to 500 inches.
LENS SHIFT
The lens can be easily raised and lowered to minimize or
eliminate “Keystone” type effects.
HIGH PICTURE QUALITY
The three LCD panels contain 786,432
×
RGB pixels to
achieve exceptionally bright, high quality video images
with up to 520 scan doubled TV lines of resolution (700
lines for S-video).
VERSATILE REMOTE CONTROL
•
Built-in wireless mouse allows simultaneous operation
of projector and computer.
•
Built-in Laser Pointer for professional presentations.
BUILT-IN STEREO SPEAKERS
Built in 3 W + 3 W stereo amplifiers and speakers elimi-
nate the need for external audio components.
USE WITH “PLUG AND PLAY”
“Plug and play” compatible with VESA DDC 1 and DDC
2B standards.
