E-18
3. Connecting to other compatible
computers
When connecting the projector to a compatible computer
other than an IBM-PC (VGA/SVGA/XGA/SXGA) or
Macintosh series, a separate cable is needed. Please
contact your dealer for ordering information.
Notes:
•
Connecting computers other than the recommended types may result
in damage to the projector, the computer, or both.
•
Connect the audio from the computer to the COMPUTER AUDIO
INPUT terminal.
4. Connecting to the COMPUTER AUDIO
INPUT
•
The COMPUTER AUDIO INPUT accepts COMPUTER RGB
input.
•
Connect a 3.5 mm Stereo Minijack-RCA L/R cable (not
included) from the audio output terminal on the computer to
the COMPUTER AUDIO IN terminal on the projector.
5. Connecting an external monitor
Connect your computer monitor to the projector’s COM-
PUTER RGB OUTPUT terminal to view images simulta-
neously on the external monitor and the projection
screen. Select either RGB 1 or RGB 2 to output the
images to the monitor.
Caution (Apple Macintosh):
Do not connect the COMPUTER RGB OUTPUT to any
monitor except the following:
Apple Color RGB Monitor 13"/14" (640
×
480),
16"/17" (832
×
624) or 19" (1,024
×
768)
The output signal from the projector to the monitor should be
the same as the input signal from the computer to the
projector.
Example: Input 13"/14" (640
×
480)
→
Output (640
×
480)
Input 16"/17" (832
×
624)
→
Output (832
×
624)
Input 19" (1,024
×
768)
→
Output (1,024
×
768)
Note:
•
The supplied adaptor is only for use with H-SYNC and V-SYNC output. No
picture will appear when connected to monitors that only use C-SYNC.
Notes:
•
When using the projector with an external IBM-PC monitor, connect
the monitor using the supplied cable. When using the projector with a
Macintosh monitor, an optional adaptor cable is required. Before using
any other type of monitor, carefully check the monitor’s interface
specifications and make sure that they match the specifications of the
projector’s interface.
•
The external monitor output will only display an analog computer input
signal. It will not display a digital or video input signal. To split the
composite video signal, use a video distribution amplifier. This is
available from your local dealer. The computer RGB output will only
loop through the same signal connected to the computer RGB input.
(VGA IN
→
VGA OUT, Mac IN
→
Mac OUT)
4
5
Optional Macintosh
adaptor cable
Direct
connection
External IBM-PC
monitor
U.S.A. ONLY
External Macintosh
monitor
OUTPUT
INPUT1
RGB
COMPUTER
B
H
L
R
V
DC5V OUTPUT
MAX CURRENT 1A
COMPUTER
AUDIO IN
AUDIO OUTPUT
OUTPUT
INPUT2
RGB
WIRED
REMOTE
FOR PC98
MOUSE
or
