manualshive.com logo in svg

Sharp VT-3428X, Руководство по обслуживанию, Страница: 5 / 136

Поделиться
Скачать
Sharp VT-3428X Скачать руководство пользователя страница 5

The remote control lets you operate this product at a distance. Just aim the front of the remote
control at the photoreceptor window situated on the front panel and press the appropriate

Inserting the Batteries

Press

Down 

Battery

Cover

Slide off

Slide on

The remote control operates on two 

 

 

volt batteries (included). If the remote control does

‘not operate or fails to function normally due to weak

batteries, new batteries can be purchased at elec-
tronics or camera stores.

 Open the battery cover. (Remove any old

batteries that may be in the remote control.)

 Insert 

w a

b 

 and match their polarities

( + and   ) with the markings inside the compart-
ment.

 Replace the cover.

l 

You can set clock and timer recordings using the remote control.

Clock setting:

see SETTING THE CLOCK

Timer recording: see RECORDING WITH THE TIMER

NOTES:

l 

Do not subject the remote control to impact, water or excessive humidity.

l

The remote control may not function if the photoreceptor window of this product is in direct
sunlight or any other strong light. If so, move the product or alter the lighting.

l 

Incorrect use of batteries may cause them to leak or burst.

l 

Do not mix old and new batteries, or mix the brands used.

l

Both rechargeable and disposable batteries are available. Read the battery warnings and

do not try to recharge disposable batteries.

l 

Remove the batteries if the remote control will not be used for a long time.

SENSOR AREA

FOR REMOTE CONTROL

POWER ON/OFF button 

 

 TIMER

 TIMER

 SELECT

buttons

TIMER ON/OFF button

EJECT/LOAD button

MUTE button

DISPLAY button

VOLUME ADJUSTMENT buttons

CHANNEL UP/DOWN buttons

(TRACKING buttons)

PROGRAMME button

MENU button

SET button

STOP button

 button

PAUSE/STILL button

PLAY 

button

 button   

Video Search

COUNTER RESET button

 button   Reverse

Video Search

Содержание VT-3428X









































































































































Отзывы:

Нет отзывов