Sharp VT-3418X Скачать руководство пользователя страница 24

Страница: 24 / 170

REPLACEMENT AND HEIGHT CHECKING

AND ADJUSTMENT OF REEL DISKS

Remove the cassette housing control assembly.

Set the mechanism in the playback mode with no
cassette tape in place. Unplug the power cord.
Set the idler gear in the center (neutral).

Removal (Supply reel disk)
Remove the tension band

(Take care not to

deform it.)

Unscrew the screw

and remove the supply reel

retainer assembly
Release the supply reel disk catch

and back

tension lever

Pull the supply reel disk upward.

Notes:

Take care not to deform the tension band.
Check and adjust the tension pole position. (See

page

Be careful not to damage the gear and the idler

gear on the supply reel disk.

Press the tension band in the direction of the

arrow for removal (See Figure

Note:

When the tension band is pressed in the direction
of the arrow for removal, the catch is hard to be
deformed.

Figure

Removal (Take-up reel disk)
Unscrew the screw

and remove the take-up

reel retainer.
Release the take-up reel disk catch
Pull the take-up reel disk upward.

Take-up

reel disk

e-up reel retainer

Figure

Reassembly (Supply reel disk)
Clean the reel disk shaft and apply oil to it.
Release the supply reel disk catch and back

tension lever

Install a new supply reel disk onto the shaft.
Replace the tension band around the supply
reel disk, and insert it to the hole of the tension

arm.

Replace the supply reel retainer assembly

place, and tighten up the screw

Notes:

Take enough care not to deform the tension

band during installation of the supply reel disk.
Be careful not to damage the supply reel disk

gear, back tension lever, supply reel disk catch,
or the Ii

with tools.

5 Tension band

Supply reel disk catch

Figure

Содержание VT-3418X











































































































































































Результаты поиска

Содержание VT-3418X

Отзывы:

Sharp VT-3418X, Руководство по обслуживанию, Страница: 24 / 170

Результаты поиска

Содержание VT-3418X

Отзывы: