Sharp VL-PD6H Quick operation, Руководство по эксплуатации

Страница: 29 / 116

Basic
Operations
20
Zooming
Zooming allows you to move visually closer to
or farther from a subject without physically
changing your position.
To zoom in
Press the Power Zoom T (telephoto) button to
get a close-up view (
Q ).
To zoom out
Press the Power Zoom W (wide angle) button to
get a wide field of view (
W ).
Q W
2
Zooming in (when you want to centre
attention on the subject)
Zooming out (when you want to
show the surroundings)
Tele-
photo Wide
angle
Tips on Recording Positions
To create images that are easy to watch during
playback, try to record with a stable posture
while steadying your camcorder to prevent the
image from shaking.
Holding the camcorder
Put your right hand through the hand strap,
and place your left hand under the camcorder
for support.
Note:
• Take care not to touch the microphone with your
fingers during recording. It will cause noise on
the audio track.
Zoom range indicator
Place the viewfinder
eyecup firmly
against your eye.
Place your elbows
against your sides.
Balance your weight
on both legs.
Shooting from a high angle
Turn the LCD
monitor so that the
screen faces
downward.
Shooting from a low angle
Using the viewfinder
Turn the LCD
monitor so that the
screen faces
upward.
Raise the viewfinder
to view the subject.
Using the LCD monitor
Power Zoom
buttons
Basic posture
• The on-screen display shows you the current
zoom setting.
• The zoom speed depends on how strongly
you press the Power Zoom buttons.
Notes:
• The camcorder is unable to focus when zooming
in on subjects within 1.5 m. The camcorder will
automatically zoom out until it is able to focus on
the subject. (See page 36 for recording macro
shots.)
• See page 31 for use of the digital zoom.
VL-PD6H/019-021 01.4.24, 0:24 PM 20
Downloaded from: http://www.usersmanualguide.com/