Sharp VL-PD6H Quick operation, Руководство по эксплуатации

Страница: 108 / 116

Appendix
Appendix
99
Cleaning
• Many plastic parts are used in the camcorder
casing. Do not use thinners, benzenes or
other strong chemical cleaners. These may
cause discoloration and damage to the
casing.
• Clean the casing with a soft, dry cloth. If the
casing is particularly dirty, wipe the casing
with a tightly wrung cloth dampened with a
diluted, neutral detergent. Then wipe it again
with a soft, dry cloth.
• Use a soft cloth to wipe finger marks and
other soiling off the LCD screen.
• Use a soft cloth, or compressed air and lens
paper designed for photographic lenses to
clean the lens and the viewfinder eyepiece.
Dirty Video Heads
Using the camcorder when the video tape is
dirty may cause the heads to clog, producing
noise on the recorded image or preventing the
image from being recorded at all.
If the video heads become clogged, the
indicator appears on the screen. Contact your
SHARP dealer for further advice or refer to
page 101 “Before Requesting Service”.
Using a Cleaning Tape (Commercially
Available)
Video head cleaning can be done by using a
commercially-available cleaning tape.
Notes:
• Excessive use of the cleaning tape, however,
may cause damage to the video heads. Please
read the instructions accompanying the
cleaning tape carefully before using it.
• The fast forward and rewind functions cannot be
used when the cleaning tape is in the
camcorder.
1
Insert a cleaning tape into the camcorder.
2
Hold down the Lock button and set the
Power switch to VCR.
• The video head cleaning screen appears.
3
Press the SET-PUSH dial to begin video
head cleaning.
• “NOW CLEANING” flashes during cleaning.
S T ART
S T OP
C L E AN I NG
NOW C L E AN I NG
PUSH
After about 20 seconds, video head cleaning
automatically finishes, and “EJECT THE
CASSETTE.” is displayed.
Using Your Camcorder Abroad
Television signal standards and electrical
voltages and frequencies vary substantially
from country to country. When you are abroad,
check the sections below before using the AC
adapter or connecting the camcorder to a TV.
AC Adapter/Battery Charger
(Supplied Accessory)
The supplied AC adapter is compatible with
50 Hz and 60 Hz electrical systems in the range
of 110 V to 240 V AC.
Television Signal Standards
In any country, you can always watch the video
picture by using the LCD monitor or the
viewfinder. However, if you want to watch the
picture on a TV screen, the TV must be PAL
system compatible. PAL is used in the following
countries:
Germany, Great Britain, Sweden, Denmark,
Austria, Belgium, Switzerland, Italy, Spain,
Holland, Finland, Portugal, Norway, Hong Kong,
Thailand, Australia, New Zealand, Singapore,
Kuwait, China, etc.
4
Remove the cleaning tape.
To cancel cleaning, press the SET-PUSH dial
again.
VL-PD6H/093-103 01.4.24, 0:45 PM 99
Downloaded from: http://www.usersmanualguide.com/