Advanced Features
Playback
Advanced Features
67
Configuring Software for
PC Connection
This camcorder can transfer still playback
images in TAPE-VCR mode or still images in
TAPE-CAMERA and CARD modes to a
personal computer by using the supplied Video
Capture Software.
System Requirements
• IBM PC/AT or compatible with Intel
b
Pentium
b
133 MHz or faster processor
• Microsoft Windows
b
95B, Windows
b
95C,
Windows
b
98, Windows
b
98 Second Edition,
Windows
b
2000 Professional*, or Windows
b
Me operating system
• 32 MB or more of RAM
• 9 MB minimum of available hard-disk space
• SVGA (800
K
600 pixels) colour display
monitor with 16-bit colour or higher
• CD-ROM drive (for installation)
• RS-232C serial port
• Mouse or other pointing device
Connecting the camcorder to a
Personal Computer
1
Turn off the PC.
2
Connect the camcorder as shown below.
• Before connecting the camcorder to the
PC, make sure that the PC power is off
to insure that images are transferred
properly.
3
Turn on the PC.
To RS-232C port
(D-sub 9-pin port)
PC connecting cable (supplied)
To PC connection jack
Notes:
• It is recommended to use the AC adapter/battery
charger as a power source for extended periods
of use.
• Images with the following functions cannot be
transferred to a personal computer.
— TAPE-VCR/CARD-VCR mode: Playback Zoom,
Picture Effect Playback
— TAPE-CAMERA/CARD-CAMERA mode: Digital
Zoom, Digital Picture Effects, Scene Menu
• Using a commercially available floppy disk
adapter or PC card adapter, it is possible to
directly transfer still images on a SmartMedia
card to a PC (see page 82).
• To edit still images transferred with the Video
Capture Software, use a commercially available
image editing software.
* In the Windows
b
2000 Professional environ-
ment, only the system administrator has
installation access rights.
Installing the Software
1
Turn on the PC and start up Windows.
2
Insert the CD-ROM of the Video Capture
Software into the CD-ROM drive.
3
Double click on the “My Computer” icon.
4
Double click on the CD-ROM drive icon.
5
Double click on the “Setup.exe” file.
6
Follow the instructions as they appear
on the PC monitor until the installation is
complete.
7
Restart the PC.
Содержание ViewCam VL-WD450E
Страница 1: ...LIQUID CRYSTAL DISPLAY CAMCORDER ENGLISH OPERATION MANUAL VL WD450E VL WD650E ...
Страница 110: ...Note ...
Страница 111: ...Printed in Malaysia TINSL0276TAZZ 01P03 M G SHARP CORPORATION ...