Sharp VC-A53X, Руководство по эксплуатации

Страница: 27 / 32

The zero-back function makes the cassette fast forward (or rewind) to the previously set point
and stop there.
0
Make sure the counter is displayed, then press the CLEAR button on
the remote control at the point you wish to return to later.
is
displayed.
Press the ZERO BACK button on the remote The VCR
automatically detects the direction of the position and fast
forwards (or rewinds) the tape.
When the tape reaches the position, the tape automatically
stops.
NOTE:
l
The zero-back function does not operate during recording. The function works during the playback, stop, fast
forward, rewind and video search modes.
With this feature you can quickly locate a desired section of the tape. The DPSS feature makes use of
index signals to search for a specified tape segment and begin playback automatically.
lndex Signal
An index
signal is automatically recorded on the
tape at the start of ordinary recording, simple
recording timer and timer recording.
Index signals
Load a tape containing index signals into the VCR.
Select the index number of the desired programme using the DPSS
or button on the remote control.
Search starts immediately after you release the button. (When a signal
is located, the displayed number decreases.)
When the selected index signal-encoded section is found, playback
begins automatically.
NOTES:
l
DPSS may not function properly if the index signals are too close together (within 3 minutes of each other).
l
DPSS can be cancelled by pressing the or STOP button.
l
If the tape reaches its end or is rewound completely before locating the desired index signal, DPSS is cancelled.
l
DPSS may not function for damaged or worn tapes.
l
The DPSS function cannot be used with tapes that contain no index signals.
l
The starting point of a programme may vary slightly.
l
DPSS does not operate during the slow, still, record, timer standby, and timer recording modes, or when there is
no cassette loaded.
With this feature, the entire tape is played back repeatedly.
0
Press the button on the remote control, lights and the AUTO REPEAT is
engaged.
When the video cassette reaches its end, the VCR will stop playback, rewind the
tape, and automatically play it back again.
NOTE:
l
Pressing the button during auto repeat cancels it.
disappears, and the AUTO REPEAJ is disengaged.
26