Turn on your TV and select the video channel.
Press the OPERATE button to turn on the VCR, and then press the
MENU button to display the MENU screen.
Select the item you want by pressing the or button on the
remote control. Refer to the pages listed below for details on each
item.
MENU
TIMER
MODE
CHANNEL PRESET
CLOCK
LANGUAGE
The following 6 items can be set by using the On Screen Display (OSD).
G-CODE . . . . . . . . . . . . . . . . . . . . . . . Setting a G-CODE timer recording. (See page
20.)
SELECT :A
ENTER
:SET
EXIT
2: TIMER . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting a timer recording (and checking it). (See page 22 for the setting
procedure.)
3: MODE . . . . . . . . . . . . . . . ..a......... VCR operating conditions are set according to the broadcast reception and
tape playback conditions. (See page 14.)
4: CHANNEL PRESET . . . . . . Setting the channels. (See page
5: CLOCK . . . . . . . . . . . . . . . . . . . . . . . . . Setting the present time. (See page 9.)
6: LANGUAGE . . . . . . . . . . . . . . . . . Selection of language to be used for the On Screen Display. (See page 8.)
Press the SET button. The screen changes to the item which you have selected.
To cancel the MENU screen, press the MENU button.
The tape counter and VCR
mode
can be shown on the screen while you are playing back a tape or
watching a broadcast on the video channel.
Display example
Operating mode
2
Programme channel position
Tape Speed
STOP
Simple Recording timer
Clock display
Calendar display
(
REM
96
Tape remaining (or DPSS)
Real time counter
NOTE:
l
If the clock is not set, the time and date will not be displayed.
How to display indicators
Turn on your TV and select the video channel.
Press the OPERATE button to turn on the VCR. Mode indicators are displayed in the AUTO display
screen.
Each time the MODE OSD button is pressed, the screen changes as follows:
AUTO Display
FULL Display
COUNTER Display
Display off
AUTO
Display
When an operation button, numbered button, or CH
button is pressed, the current mode or the
number of the channel will be displayed in the upper section of the TV screen for about 3 seconds.
NOTES:
l
When the VCR power is turned off, the mode indicators will return to the AUTO display.
l
When you record a video signal output from this VCR on another VCR, press the MODE OSD button to select
Display Off. (If the mode indicator is displayed on the screen, it is also recorded on the tape.)
13
Содержание VC-A53X
Страница 1: ......