background image

2

Important safety information

Do not disassemble this product or attempt any procedures not described in this manual. Refer 
all servicing to qualified service personnel.

Do not use this product near water, or when you are wet. For example, do not use this product 
near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming 
pool. Take care not to spill any liquids on the product.

Unplug the product from the power outlet and consult a qualified service representative if any 
of the following situations occur:
- Liquid has been spilled into the product or the product has been
  exposed to rain or water.
- The product produces odors, smoke, or unusual noises.
- The power cord is frayed or damaged.
- The product has been dropped or the housing damaged.

Do not allow anything to rest on the power cord, and do not install the product where people 
may walk on the power cord.

The AC adapter must only be connected to a 120 V, 60 Hz outlet. Connecting it to any other 
kind of outlet will damage the machine and void the warranty.

Never insert objects of any kind into slots or openings on the product. This could create a risk 
of fire or electric shock. If an object falls into the product that you cannot remove, unplug the 
product and consult a qualified service representative.

Do not place this product on an unstable cart, stand or table. The product could be seriously 
damaged if it falls.

Battery

Use only the battery specified in this manual. Use only the provided charger to charge the 
battery.

Do not open or mutilate the battery pack. Corrosive fluid may leak out and cause injury or 
burns to the eyes and skin. The fluid may be toxic if swallowed. In case of contact with eyes, 
flush with clean water (do not rub), and seek medical attention immediately.

Do not store or carry the battery with other metal objects such as keys or pins. These may 
short the battery and cause it to overheat.

Do not allow the battery to become wet.

Do not dispose of the battery in a fire or heat the battery. The battery may explode.

Health care facilities and equipment

Radio frequency energy emitted from the cordless handset equipment may cause medical 
equipment to malfunction. Verify that any personal medical equipment you are using is 
adequately shielded from external radio frequency energy before using the cordless handset 
equipment. Do not use the cordless handset equipment in health care facilities where such 
use is prohibited.

all.book  Page 2  Wednesday, January 21, 2004  4:24 PM

TCADH3669XHZZPP

Содержание UX-K02
































Отзывы: