UX-B20U/UX-B20C/B25C
2 – 6
7. How to make soft switch setting
To enter the soft switch mode, press the following key entries in sequence.
Press FUNCTION
9
8
7
START
START
Press FUNCTION key.
Press
key.
Press
key.
Bit1 - 8 are set.
Soft SW-A2 - SW-P7 are set.
S F T SW-A1 = 1 0 0 0 0 0 0 0
S F T SW-A1 = 1 0 0 0 0 0 0 0
S F T SW-A1 = 1 0 0 0 0 0 0 0
S F T SW-A1 = 1 0 0 0 0 0 0 0
S F T SW-A2 = 0 0 0 0 0 0 0 0
S F T SW-P7 = 0 0 0 0 0 0 0 0
Press
key during setting.
To finish the settings halfway between
SW-A1 and SW-P7, press the STOP
key. In this case, the setting being done
to the SW No. on display will be nullified
while settings done to the preceding
SW No. remain in effect.
The soft switch mode is terminated.
S F T SW-A1 = 0 0 0 0 0 0 0 0
START
DATA No.
1 2 3 4 5 6 7 8
When the COPY key is pressed, the
contents of soft switches are printed.
