13
E
E
E
E
E
STEP-BY-STEP INSTALLATION GUIDE
The Filler Block is only used for recessed cabinet and front
overhang cabinet (see the type of the cabinet on page 8 - 9). Place
the Filler Block to the cabinet bottom before installing the oven.
5.
Tighten the outer two screws to the top of the microwave oven.
While tightening screws, hold the microwave oven in place against
the wall and the top cabinet.
Cabinet front
Equivalent to
depth of cabinet
recess
Cabinet bottom
Filler block
Cabinet mounting bolt
Microwave oven top
Washer
6.
Install grease filters. See the Operation Manual packed with the
microwave.
A5.
ADJUST THE EXHAUST ADAPTER
Open the top cabinet and adjust the exhaust adapter to connect to
the house duct.
Damper
Blower Plate
Back of
microwave
For front-to-back or
side-to-side adjustment,
slide the exhaust
adapter as needed
A6.
CONNECT DUCTWORK
1.
Extend the house duct down to connect to the exhaust adapter.
2.
Seal exhaust duct joints using duct tape.
House duct
B. OUTSIDE REAR EXHAUST (HORIZONTAL DUCT)
Installation overview
B1. Prepare the Rear Wall Template for outside back exhaust.
B2. Attach the mounting plate to the wall.
B3. Use Top Cabinet Template for preparation of top cabinet.
B4. Adapt microwave blower for outside back exhaust.
B5. Mount the microwave oven.
