61
1
3
2
2
2
2
1
1
1
1
1
1
2
2
2
ピーッ
What to do
Moving / Transporting
Empty the ice tray.
Remove the power plug.
Remove the ground wire.
Pull up the adjustable foot.
page 49
When moving front / back
Preparation
Raise the adjustable feet and use the transport
wheels.
Transport wheels
(Front, back, left and right)
Turn
Adjustable foot
(right and left)
Use the transport handles on the back and the
bottom of the product.
Fix with a tape, etc. to prevent
the doors from opening.
On top of the
back surface
Bottom
When carrying
To carry out the refrigerator, lay a sheet, etc. for
protection on the path.
If water remains on the evaporation tray (which cannot
be seen from outside) inside the refrigerator, it may
become spilled on the floor.
Notes
Do not place sideways.
Scratching and damage of the
machinery parts may occur as
a result.
Do not hang the refrigerator using ropes, etc.
The refrigerator may drop as a result.
When the compartment light is blown
Contact the Sharp Service Center to request a
replacement compartment light.
The compartment light is not to be removed other than by
qualified service personnel.
Power outage
Muting Beep
Electronic tones (beep) that sound when operating
the LCD panel can be muted.
Even when Beep is muted, the door-open buzzer and
completion buzzers for Warming, Defrosting, Express
Cooling and Timer will still sound.
The same applies to turn on sound.
The same applies to turn release.
Will immediately return to normal display. " " disappears.
Will immediately return to normal display. " " will be displayed.
Child lock
Key operations of the LCD panel can be disabled. Use this
feature to prevent children from tampering with the panel.
Do not store more food nor open/close door.
Warming, defrosting, and Express cooling will stop,
and Temperature zone selection compartment will
be set to "Fresh case" when power comes back on.
Timer, Express cooling, Express ice making, and
Deep freezing will stop, and number of door
opening/closing will be set back to "0."
Beep
Beep
…
Blinks
Blinks
Lights
up
Lights
up
Press "Select".
Select " "
Press "Select".
Select " "
Beep
Beep
…
Blinks
Lights
up
Blinks
Lights
up