44
Temperature zone selection compartment
To cancel operation
Beep
Beep
…
Blinks
Blinks
Press "Temperature zone selection".
Press "Select".
Temperature zone selection
compartment switches to
"Fresh case" mode.
The temperature zone selection compartment will not immediately reach the "Fresh case" zone.
(It will take approximately 30 minutes to 1 hour. The LCD panel will show " ".)
Set up the period within 15 minutes after
Warming completion (cancel).
(It will go into the "Do not operate warmer
function mode" after 15 minutes.)
The extension period becomes shorter
depending on the previous Warming
operation period as shown on the right.
(This product can operate continuously for
no longer than 8 hours.)
When it completes 8 hours of Warming operation,
it will go into the "Do not operate warmer function"
for approximately 2 hours.
("Do not operate warmer function" also works
from 15 minutes after Warming completion
less than 7 hours to 2 hours later.)
If you try to set up Warming
operation, there will be a beep and
the control panel will not accept the
setup operation. It will show the
approximate period until the next
Warming setup will be possible.
The figure shows that Warming setup will be
possible in 1 hour and 20 minutes.
The previous Warming operation period
Extension period
Up to 7 hours
Up to 6 hours
Up to 5 hours
It cannot be extended.
Up to 1 hour
1 hour
~
2 hours
2 hours
~
3 hours
7 hours
~
8 hours
Do not operate warmer function mode
To change the Warming period or extend the Warming period during Warming operation.
This product cannot operate Warming continuously over 8 hours.
(To prevent temperature increase in other compartments)
Notes
Do not store food materials with containers whose outer surface temperatures are 100
°
C or higher. The temperature
zone selection compartment case may become deformed by the heat.
If the Warming operation and defrosting operation for the cooling unit are successively carried out, the temperatures of the
other compartments may become slightly high temporarily. However this will not affect the food storage qualities.
(Surface of food such as ice cream which are rich in milkfat in the freezer compartment may become soft.)
The temperature zone selection compartment temperature will not be immediately cool even when the temperature zone is switched
immediately after Warming completion (cancel). Leave approximately 1 hour before using "Crunchy Freezing" and "Freezing" modes.
Hot only products can be kept under Warming operation.
Do not keep the following products under Warming operation:
Glass-bottled beverages, carbonated beverages, beverages in resin containers … It may cause container deformation.
Beverages containing milk, vegetable or juice constituents … It may cause the constituents to deteriorate.
Do not keep beverage in containers from which it has been sipped directly under Warming operation.
It may promote the bacteria from mouth to multiply in the bottle.
Do not keep beverages under Warming repeatedly.
Reheating of a cooled beverage may lead to ingredient deterioration or bacterial multiplication.
Warming of beverages
