Sharp SF-2530, Руководство по эксплуатации

Страница: 8 / 92

6
GETTING STARTED
1 Open the front cover.
2 Pull down the toner hopper lock lever and pull the toner
hopper out slowly until it stops.
3 Hold the toner cartridge vertically and vigorously shake
it up and down about 20 times to loosen the toner. This
will allow the toner to flow more easily into the toner
hopper.
Adding toner
GENUINE SUPPLIES
ADDING TONER
The toner required ( ) indicator will light up when toner
concentration level in the developer unit is low. If copying is
continued while the
indicator is lit, copies will gradually become
lighter until the copier stops and the indicator begins blinking.
The
indicator may also begin blinking during long copy runs of
multiple dark originals, even though toner is left. If the indicator
begins to blink, the copier will stop making copies. Open and close
the front cover. After a sufficient amount of toner has been fed,
the
indicator will go out and the START key indicator will light up.
Press the START key to resume copying.
For best copying results, be sure to
use only Sharp Genuine Supplies
which are designed, engineered, and
tested to maximize the life and
performance of Sharp copiers.
Look for the Genuine Supplies label
on the toner package.