Sharp SF-2530, Руководство по эксплуатации

Страница: 37 / 92

35
GENERAL INFORMATION
Setting the user programs
1 Press and hold the TRAY SELECT key for more than 5
seconds until all the alarm indicators* blink and “– –”
appears in the copy quantity display.
* The alarm indicators are the , , , , and
indicators.
2 Enter a program number using the 10-key pad.
●
The selected program number will blink in the copy quantity
display.
● If a mistake is made in steps 2 to 4, press the clear (
C
) key.
You will return to step 2.
●
The program numbers are shown in the table below.
For example, to change the setting of the auto power shut-off
timer, press key 3.
Program name Program No.
Auto clear time 1
Preheat mode 2
Auto power shut-off timer 3
Auto power save control 4
Stream feeding mode 5
Override sorter bin capacity limit 6
Sorter bin access mode 7
Auto paper select mode 8
Auto power shut-off setting 9
3
Press the START key.
●
The entered program number will be steadily lit on the left side
of the copy quantity display and the currently selected parameter
number for the program will blink on the right side.
USER PROGRAMS
User programs
R
TRAY SELECT
1 2 3
4 5 6
7
0 C
8 9
START