47
INSERTS
MAKING COPIES
Inserts
INTERRUPT
INTERRUPT can be used to temporarily stop a long copy run so that
another job can be run.
●
Reduction/enlargement/zoom, exposure adjustments, dual page
copying, erase, and margin shift can be selected during interrupt
copying.
●
Duplex copying, sort, group, staple sort, covers/inserts, and
transparency inserts cannot be selected during interrupt copying.
Also job program recall cannot be selected.
●
INTERRUPT will not function during duplex copying, when the
covers/inserts feature is selected or when the optional card
counter (SF-EA11) or auditor (SF-EA12) is used and the copier
has been programmed in the auditing mode.
1
Press the INTERRUPT key.
●
When the document feeder is being used, the copier will stop
after completing the copying of the originals which have been
fed into the document feeder. The copier will return to the initial
settings.
●
If this copier has been programmed in the auditing mode, the
account number entry message will appear. Enter your
account number using the 10-key pad. The number of copies
of the interrupt copying will be accumulated against this
account number.
2
When the copier stops, remove the original(s) and set
the original(s) for interrupt copying in the document
feeder tray or on the document glass.
3
Select the desired available copier functions.
4
Press the START key.
5
When the interrupt copy run is complete, press the
INTERRUPT key again to cancel the mode and remove
the original used for interrupt copying.
●
The copier will reset itself to the functions which were in use
before the INTERRUPT key was first pressed.
6
Replace the original(s) for the interrupted job and
press the START key to resume copying.
Interrupt
Interrupt
3
6
9
C
START
CA
TRAY SELECT
INTERRUPT
AU
CA
TRAY SELECT
INTERRUPT
AU
Содержание SF-2052
