Sharp SF-2052, Руководство по эксплуатации

Страница: 123 / 134

121
KEY OPERATOR PROGRAMS
Key operator programs
P44 Restrict Storage of Inserts in Job Program Memory
Program P44 is used to prevent insert pages from being stored in job
memory.
When P44 is entered, the following message will appear.
P44: RESTRICT STORAGE OF INSERTS IN
JOB PROGRAM MEMORY.
1.YES 2.NO
To disable storing insert pages, press key 1.
To enable storing insert pages, press key 2.
P45 Message Time Setting
Program P45 is used to adjust the length of time that messages are
displayed in the range of 1 to 12 seconds in 1 second increments.
When P45 is entered, the following message will appear.
P45: MESSAGE TIME SETTING.
SET THE TIME FOR MESSAGES ––
(1 TO 12 SECONDS). PRESS THE START
KEY AFTER ENTRY.
Set the time using the 10-key pad and press the START
key.
P46 Require Key Operator Code
Program P46 is used to prevent the copier from being used by people
other than the key operator. If this program is set, the message
“
ENTER KEY OPERATOR CODE.
” will appear each time the power
switch is turned to the “ON” position.
When P46 is entered, the following message will appear.
P46: REQUIRE KEY OPERATOR CODE.
1.YES 2.NO
To require key operator code entry for access to the
copier, press key 1.
To enable access to the copier without key operator code
entry, press key 2.