E-13
SD-PX15H_SEEG_E.fm
04/2/9
ENGLISH
TINSZA052AWZZ
SD-PX15H
Pr
epara
tion f
o
r Us
e
- S
p
e
a
k
e
r c
onne
c
tion
-
Speaker connection (continued)
"
Connecting speaker wires
To prevent accidental short circuits between and terminals, connect the
speaker wires to the speakers first and then to the unit.
!
Do not pinch the speaker wires when attaching the speaker terminal cover.
!
When the centre and surround speakers are not connected, set the speaker size
to "C-NO" and "S-NO". Otherwise, the protection circuit may be activated and the
power is turned off.
"
Speaker stand
The front speakers and surround speakers support the optional floor speaker stand
(see page 64). For installation, see the manual.
Note:
Keep the removed speaker terminal covers, speaker stands, or screw in a safe place.
Make sure to leave the AC power lead disconnected when connecting the
speakers.
1
Remove the speaker terminal cover.
Example:
To connect the left surround speaker
If screws are difficult to turn by hand, use a coin or flathead screwdriver ( ).
2
Connect the wires to the speakers.
Label (blue)
Turn it over and
route the cable
through a hole.
Unscrew the
cover to remove.
Red
Red
Black
Black
Speaker terminal (blue)
Tube (blue)
Tube (blue)
Connect the other end to the main unit.
Attach the speaker terminal cover.
3
4
Label (blue)
Caution:
!
The supplied speaker designed exclusively for SD-PX15H. Do not connect
speakers for SD-PX15H to other equipment. Also, do not connect other
speakers to SD-PX15H. It may cause malfunction.
!
Do not mistake the and , and right and left terminals of the speaker wires. (The
right speaker is placed on the right when you face the unit.)
!
Do not let the bare speaker wires touch each other.
!
Do not stand or sit on the speakers. You may be injured.
!
Do not short-circuit the speaker wires. If the power is
turned on, malfunction may occur.
!
When disconnecting the speaker wires, unplug the AC
power lead, and then disconnect the speaker wires from
the main unit.
Downloaded from: