R-D219G
E-3
E-4
For cup and small bowl ( )
1
Exhaust openings
2
Door open handle
3
LCD display
4
Control panel
5
Oven lamp
6
7
8
9
10
Door seals and sealing surfaces
12
Latche
12-1
Oven floor
12-2
12-3
Door (glass)
ACCESSORIES
*See note for donabe on page E-7 for details.
OVEN DIAGRAM
Power supply cord
Donabe (Clay pot)
Outer lid
Inner lid
Pot
DONABE (RICE)
DONABE (DISH)
OPTION NUMBER for DONABE COOKING
The following options are selected by turning the knob. Each option number will be shown on the display.
OVEN FLOOR
There are two kinds of guidelines for putting utensils. Place the utensil in the centre of each circle.
For donabe and bowl ( )
8
11
1
2
3
4
12
6
7
10
5
9
12-1
12-2
12-3
1-1,
White rice (Thai rice)
1-2
2-1, White rice (Japan rice)
2-2
03 Quick cooking (Thai rice)
04 Multi grain rice
05 Brown rice
06 Porridge
07 Claypot rice
21 Boil vegetable (soft)
22 Boil pumpkin/potato
23 Boil vegetable (hard)
24 Stew
25 Instant noodle
26 Pasta
Air intake openings
11
INSTALLATION INSTRUCTIONS
1. Remove all packing materials from the oven cavity, and the feature sticker from the outside of the door, if there is
one.
Check the unit for any damage, such as a misaligned door, damaged door seals around the door or dents inside
the oven cavity or on the door. If there is any damage, please do not operate the oven until it has been checked
by
a SERVICE CENTRE APPROVED BY SHARP and repaired, if necessary.
2. Accessories provided
1) Donabe (Clay pot)
2) Operation manual
3. This oven is designed to be used on a countertop only. It should not be installed in any area where excessive heat
and steam are generated, for example, next to a conventional oven unit. It should not be installed near combusti
-
ble
materials, for example, curtains. The oven should be installed so as not to block ventilation openings. For air
ventilation allow space of at least 20 cm from the top and 10cm on the right side of the oven. Even if there is
sufficient distance for air ventilation, the oven must not be placed where five sides are blocked.
This oven is not designed to be built-in to a wall or cabinet.
4. Do not connect other appliances to the same socket using an adaptor plug.
5. Neither the manufacturer nor the distributors can accept any liability for damage to the machine or personal
injury for failure to observe the correct electrical connecting procedure. The A.C. voltage and frequency must
correspond to the one indicated on the rating label.
6. This appliance must be earthed. Securely connect the plug of the oven to a standard earthed (grounded) house-
hold electrical outlet.