TINSEA962WRRZ-K32 UK R90GCK
A39887,R90GCK O/M
WARNING:
The door, outer cabinet, oven cavity, turntable, turntable support, dishes and accessories will become very
hot during operation. To prevent burns, always use thick oven gloves.
16
15
17
2
YOUR OVEN AND ACCESSORIES
1
2
3
4
5
7
8
6
ACCESSORIES:
Check to make sure the following accessories
are supplied:
13
Turntable
14
Turntable support
15
Low rack
16
High rack
17
Splash guard
• Place the turntable support into the coupling in the centre of
the oven floor, ensuring it is located firmly. It should be able
to rotate freely around the coupling.
• Place the turntable on to the turntable support.
• Place the high/low racks and splash guard onto the
turntable if necessary.
NOTES:
• The waveguide cover is fragile. Care must be taken when
cleaning inside the oven to ensure that it is not damaged.
• Always operate the oven with the turntable and support fitted
correctly. This promotes thorough even cooking. A badly fitted
turntable may rattle, may not rotate properly and damage the
oven.
• The turntable rotates clockwise or counter clockwise. The
rotary direction may change each time you start the oven.
This does not affect cooking performance.
• After cooking, always clean the turntable support, especially
around the rollers. These must be free from food splashes and
grease. Built-up splashes or grease may overheat and cause
arcing, begin to smoke or catch fire.
• When you order accessories, please mention two details:
PART NAME
and
MODEL NUMBER
to your dealer or
SHARP authorised service facility.
13
5
14
These racks and splash guard are used
for cooking in Convection, Dual or Grill
mode.
1
Control panel
2
Waveguide cover (DO NOT REMOVE)
3
Oven lamp
4
Oven cavity
5
Coupling
6
Door latches
7
Door opening handle
(To open the door, pull the handle down
and forward. Never hold the door
handle when moving the oven.)
8
Door seals and sealing surfaces
9
Ventilation cover (DO NOT REMOVE)
10
Outer cabinet
11
Power cord
12
Air-vent openings
12
9
10
11
UK R90GCK English Cover-P19 04.1.9 8:55 AM Page 2